Skip to Content
  1. All Products
  2. All Products
  3. AVR - Automatic Voltage Regulator UVR6
USD $
AVR - Automatic Voltage Regulator UVR6

AVR - Automatic Voltage Regulator UVR6

https://generator.bochipower.com/web/image/product.template/956/image_1920?unique=2a5938f
(0 review)
El AVR UVR6 es un regulador de voltaje automático analógico, un componente estándar en alternadores Mecc Alte AC. Construido con una tecnología similar al SR7, este AVR compacto es compatible con generadores monofásicos y trifásicos que operan a 50 o 60 Hz. Ofrece una regulación de voltaje de ±1.0% (con 4% de gobierno del motor) y cuenta con protección contra sobrecarga (con retardo para una mejor aceptación en el arranque del motor) y protección de baja velocidad, ambas con parámetros ajustables e indicadores LED que se activan al intervenir. Sus especificaciones clave incluyen una entrada de detección de voltaje de 220-480 V CA, una entrada de alimentación de 50-280 V CA y una salida máxima de 63 V CC con una corriente continua de 6A (7A intermitente por 10 segundos) y una resistencia mínima de 10 Ω. Es un AVR sin escobillas, ideal para garantizar un control fiable y seguro.

$ 211.60 211.6 USD Tax Excluded

211.60 Bs Tax Excluded

  • Generator Parts
  • Applicable To
  • Weight
  • Dimensions

This combination does not exist.

Contact Us

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Share

AVR - UVR6 is the automatic voltage regulator of the generator: it reads the output voltage and corrects the field excitation so the voltage stays stable as the load changes.

A failing AVR shows up before it dies: voltage dips 5–30 V when a large motor starts, lights flicker, or the control panel reboots. When it fails completely the set delivers only residual voltage or trips on overvoltage.

Specifications and compatibility

Applicable to
MECC ALTE
Dimensions
17 x 6 x 13 cm
Weight
2.00 kg

How to verify before ordering

  • Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
  • Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
  • Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.

Frequently asked questions

How do I know the fault is the AVR and not the generator?

Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.

Can the voltage be trimmed after installation?

Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Applicable To MECC ALTE
Weight 2,00 kg
Dimensions 17 x 6 x 13 cm
Spare Parts
Generator Parts AVR