Tinned copper terminal AWG2 SC35-8 is an electrical component of the panel or control circuit: it conducts, switches, protects or signals inside the system.
In electrical work 90 % of faults sit in the joint, not in the part. A loose terminal, a bad crimp or chafed insulation produce intermittent faults that no new component will cure.
Specifications and compatibility
- Type
- COBRE ESTAÑADO
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- TERMINALES DE CONEXIÓN (BORNERA) IEC947-7-1 UK2.5B
- TERMINALES PARA CABLE CONTROL TERMINALES MACHO HEMBRA TERMINALES MACHO HEMBRA (10 UNDS)
- Resistor - Cross Varistor (for rectifier kit)
- Resistor - Varistor LSA461-9-01 (for rectifier kit)
- Resistor - Varistor ON002134-1-88882-88-A1 (for rectifier kit)
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Type | Splice, Tinned copper |
| Code | SC35-8 |
| Electrical power | |
|---|---|
| Electrical Parts | Terminals |
Su snippet dinámico se mostrará aquí...
Este mensaje se muestra ya que no brindó ni un filtro ni una plantilla para usar.
