Rectifier bridge - Universal rectifier bridge SQL40A 1600V
Universal bridge rectifier SQL40A\1600 is an auxiliary electrical part: part of the set wiring, protection or indication.
Before replacing, measure continuity and voltage under load. A terminal that shows continuity at no load can drop completely once current flows, and that is the case that wastes the most time.
Specifications and compatibility
- Amperage
- 40 A
- Dimensions
- 8,5 x 5,5 x 9 cm
- Weight
- 0.50 kg
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- PUENTE RECTIFICADOR UNIVERSAL SQL20A
- PUENTE RECTIFICADOR UNIVERSAL SQL50A\1200
- PUENTE RECTIFICADOR UNIVERSAL SQL200A\1600
- PUENTE RECTIFICADOR UNIVERSAL SQL60A\1600
- PUENTE RECTIFICADOR UNIVERSAL SQL150A\1600
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Amperage (A) | 40 A |
| Weight | 0,50 kg |
| Dimensions | 8500*5500*9000 mm |
| Spare Parts | |
|---|---|
| Generator Parts | Rectifier bridge assembly |
