Contactor - RMSCSH CJ20-630 630AMP 3P is an auxiliary electrical part: part of the set wiring, protection or indication.
Before replacing, measure continuity and voltage under load. A terminal that shows continuity at no load can drop completely once current flows, and that is the case that wastes the most time.
Specifications and compatibility
- Brand
- RMSCSH
- Electrical type
- Contactor
- Amperage
- 630 A
- Pole
- 3P
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
- Declared make or line: RMSCSH. If your equipment carries another make, the part may not be equivalent.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- Relé - Volvo Penta 14594545
- Diodo de perilla – ZX70-12- Negativo
- BOTON SELECTOR LA38\203 209B INTERRUPTOR DE 22MM
- BOTON PULSADOR ROJO XB2-BVM4LC 220 VOL
- BOTON PULSADOR ZB2-BWB51C AMARILLO
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Brand | RMSCSH |
| Amperage (A) | 630 A |
| Pole | 3P |
| Electrical power | |
|---|---|
| Electrical | Contactor |
Su snippet dinámico se mostrará aquí...
Este mensaje se muestra ya que no brindó ni un filtro ni una plantilla para usar.
